Check the underside label before troubleshooting. A G502 HERO, G502 X, and PRO X SUPERLIGHT are different devices, even if their symptoms sound alike.
Click deliberately once at a time. Use at least 21 clicks for a clean result.
Click here to start testing
Leave a clear pause between single clicks. Use at least 21 clicks for a clean result.
Identify the model and the failing control
| Model | First distinction | What to test |
|---|---|---|
| G502 HERO or original G502 LIGHTSPEED | Logitech documents traditional mechanical primary switches | Make spaced single clicks, then run the wheel test separately |
| G502 X, X LIGHTSPEED, or X PLUS | Logitech documents LIGHTFORCE hybrid primary switches | Restore default G HUB mappings before attributing duplicated input to the switch |
| Original PRO X SUPERLIGHT | Confirm the original model and receiver rather than assuming SUPERLIGHT 2 settings apply | Test a direct receiver connection and compare on another computer |
Logitech G502 family comparison · Original PRO X SUPERLIGHT
Compare the click and wheel tests independently
Make at least 21 deliberately spaced single presses. A repeatable short interval is worth retesting with a default G HUB profile. For jumpy scrolling, switch to the scroll wheel test and scroll in one direction at a time. On the G502, compare the wheel's ratcheted and free-spin modes separately.
If the issue follows the same physical control to another computer, check the maker's service terms before ordering parts or opening the device. Save the double-click result and include the exact model.